Knowledge Center
Expert guides on paper machine clothing — forming fabrics, dryer fabrics, press fabrics, machine optimization, and troubleshooting. All content written by PAPTEX engineering team.
Flat Yarn vs Spiral Dryer Fabric: A Complete Comparison Guide
Compare flat-yarn and spiral dryer fabrics by machine position, sheet support, permeability, seam handling, contamination and measured operating cost—not universal life or savings claims.
Read Article
Dryer Fabric Selection Guide: Air Permeability, Weave and Seam
A practical method for matching dryer fabric permeability, structure and seam design to each dryer group instead of choosing one universal CFM value.
Read ArticleHow to Specify a Replacement Dryer Fabric: A Field Data Checklist
A practical checklist for collecting the machine, fabric, operating and installation data a supplier needs to quote a replacement dryer fabric accurately.
Read Article
Dryer Fabric Seam Installation: A Pre-Start Inspection Checklist
A practical pre-start inspection checklist for dryer fabric seams: identification, orientation, closure, tracking, clearance and early-run observation.
Read ArticleBoard Paper Dryer Fabric RFQ Checklist: What to Send for a Position Review
Prepare a board-paper dryer-fabric RFQ with the dryer position, current fabric details, dimensions, seam constraints and operating observations needed for a position-specific review.
Read ArticleRound Yarn vs Flat Yarn Dryer Fabric: Compare the Specification, Not Just the Name
Compare GW22504K and BGW22608 yarn shape, weave, permeability and seam details. Check what matters before choosing a replacement dryer fabric.
Read ArticlePackaging Paper Dryer Fabric: An Anonymised Project Profile
Packaging-paper machines place demanding loads on dryer fabrics. Heat, edge wear, contamination, tracking stability and moisture-profile consistency all affect the operating result. This project profile explains how PAPTEX turns those observations into a technical dryer-fabric recommendation.
Read ArticleHydrolysis-Resistant Dryer Fabric: What to Check Before Replacement
Check whether hydrolysis is the likely dryer-fabric failure mode, read the documented BGW22608 specification and prepare evidence for a replacement review.
Read ArticleDryer Fabric Cleaning Troubleshooting: Is the Fabric Plugged?
Diagnose dryer-fabric deposits, rule out competing dryer-section causes, and record comparable permeability observations before and after approved cleaning.
Read Article
Used Dryer Fabric CFM vs a New-Fabric Specification: What Can You Compare?
A used dryer fabric CFM reading is not automatically a new-fabric specification. Check method, pressure, units and measurement locations before comparing values.
Read ArticleNeed Personalized Technical Support?
Our team of engineers is ready to provide customized recommendations for your paper machine.
Contact an Engineer