1 / 1
成形网
PAPTEX SL Single Layer Forming Fabric
型号： SL-2600 · Single-layer forming fabric for selected paper-machine forming-section duties.
PAPTEX SL single layer forming fabric is specified for paper-machine forming sections where a single-layer construction fits the paper grade and operating conditions.
适用纸种
📄Tissue paper📄Cultural paper📄Specialty paper
始于1979年
ISO 9001认证
最佳应用
针对这些纸种和纸机工况设计
为什么选择PAPTEX
Application-specific selection
The fabric construction is confirmed for the required paper grade and running conditions.
Support from fabric review
Existing fabric and machine data can be reviewed before a replacement is specified.
工程概述
Single Layer Forming Fabric
PAPTEX SL single layer forming fabric is specified for paper-machine forming sections where a single-layer construction fits the paper grade and operating conditions.
Selection is based on formation needs, drainage, machine speed, furnish characteristics and the existing wire-section setup.
已验证证据
基于证据的质量
每项声明均有测试报告、认证和工厂数据支撑。
检测报告
EV-TEST-002量化 + 工况 (L4)
拉伸强度测试 — ISO 9073-3
Per ISO 9073-3 standard N/cm · MD and CMD, 23°C ± 2°C, 50% ± 5% RH
来源: In-house universal testing machineEV-TEST-003量化 + 工况 (L4)
抗水解测试
Retained ≥85% tensile after 150 days % retention · at 120-160°C saturated steam
来源: Accelerated aging test, internal lab protocol PTL-027EV-TEST-004
耐磨测试 — ISO 12947
Per ISO 12947 (Martindale)
技术规格
| Fabric type | Single layer forming fabric |
| 材质 | Polyester (PET) |
| 应用领域 | Paper-machine forming section |
| Selection basis | Paper grade and forming-section conditions |
需要定制规格？
我们的工程师可根据您的纸机参数定制网布。
技术结构
PAPTEX SL Single Layer Forming Fabric — Single-layer forming fabric for selected paper-machine forming-section duties.的截面结构图。专为最佳脱水、纤维支撑和耐用性而设计。
图示：PAPTEX SL Single Layer Forming Fabric 截面结构示意图
Next Steps
Ready to Learn More?
Start with a datasheet or go straight to an engineer — no pressure.
📄
下载技术数据表
Full technical specifications, performance data, and installation guidelines.
Free & Instant📦Request Samples
Get a sample piece for evaluation. Standard A4 size, delivered in 5-7 days.
Email Required🔬索取测试报告
Full lab test report: ISO 9237 permeability, ISO 9073 tensile, ISO 12947 abrasion.
Email Required🔄Compare Technical Routes
See how this product compares with alternatives. Side-by-side technical analysis.
技术方案对比
进入对比中心 →常见技术方案对比
对比不同技术路线，为您的纸机找到最佳方案。
常见问题解答
关于 PAPTEX SL Single Layer Forming Fabric 的常见问题
It is selected where the paper grade and machine conditions are suitable for a single-layer construction.
知识中心
Knowledge Center →Recommended Reading
Technical articles, guides, and resources for your application.
Buyer Journey
Your Next Step
您当前处于阶段 4/8：产品详情
行业动态Inquiry
1
2
3
4
5
6
7
8
对 PAPTEX SL Single Layer Forming Fabric 感兴趣？
请提供您的纸机参数，我们将为您定制报价。
