Why Does My Press Felt Plug So Quickly?
FAQ
Common causes of rapid press felt plugging:
Inadequate shower pressure (<20 bar) or clogged nozzles — Inspect weekly. One clogged nozzle = one accelerated fill stripe.
Chemical precipitation — Check pH levels, implement scheduled chemical cleaning.
Excessive carryover from forming section — Improve first-pass retention.
Felt design too dense for your stock — Specify a more open fiber layer structure.
Uhle box vacuum too low — Check vacuum level (target 30-50 kPa) and slot condition.
Prevention: Optimize shower pressure (20-35 bar), maintain nozzles, schedule chemical cleaning every 2-4 weeks.
Technical Background
This answer is based on PAPTEX's expertise in Press Felt. PAPTEX provides engineered fabric solutions to 200+ paper mills worldwide.
Related Resources
- 📖 View our Product Knowledge for more information
- 📋 Browse Press Felt related articles
- 📞 Contact PAPTEX Engineers for personalized recommendations for your paper machine
Last updated: July 2026
Related Articles
How to Choose the Right Forming Fabric
Choose a forming fabric using paper grade, furnish, former configuration, drainage, sheet-quality targets, machine data and current-fabric observations.
How to Extend Paper Machine Clothing Service Life
Understand the key factors affecting fabric life and discover practical tips for extending replacement intervals.
Top 5 Tips for Paper Mill Managers Selecting PMC Fabrics
Five practical checks for selecting paper machine clothing from machine position, furnish, operating data, baseline performance and measured total cost.